Kenwood 6Press the ENTER key, 4Select the delay time, 5Adjust the volume balance, Delay time, –10, +10, “No”, “30ms”, “15ms”, “Test L” (Left), “Test R” (Right)

4Select the delay time.

SELECT

4 ¢

23

MULTI CONTROL

5Adjust the volume balance.1 Press the MULTI CONTROL key while “Test C” or “Test S” is displayed.

2Adjust the surround speaker volumes equal to the volume of the test tone from the left and right front speakers.

To increase

4 ¢

23

MULTI CONTROL

To decrease

Display for the center speaker volume adjustment :

C - c h + 8

Display for the surround speaker volume adjustment :

S - c h + 8

3After completing the volumes from all the speakers, press the SELECT key.

SELECT

6Press the ENTER key.

ENTER

Effective sound adjustment 57

XD-SERIES (EN/M,T)

+Scrolled display (Select delay time)

S e l e c t d el 2 0 m s

The following items can be selected by turning the MULTI CONTROL jog dial.

“20ms” ... When the listening position is located between the front and surround speakers

“30ms” ... When the listening position is closer to the surround speakers

“15ms” ... When the listening position is closer to the front speakers

+Scrolled display (Select Channel Level)

S e l e c t C ha T e s t L

The display and test tone output speaker are switched automatically.When adjusting the center speaker and surround speaker volume levels :

1		“Test L” (Left)
2		“Test C” (Center)
3		“Test R” (Right)
4		“Test S” (Surround)
÷When the center speaker and/or surround speakers are
	set to “No” in the “Surround setting” procedure steps
	2 and/or 3, the display and test tone output of the
	speakers are not provided.
÷ Be sure to adjust from your listening position.
÷ The volume level can be adjusted in steps of 1 dB.
÷The volume levels can be adjusted in the range from –10			Application
	dB to +10 dB.
÷The set center level value will be stored as the common
	setting for “Dolby Pro logic” and “Dolby 3 stereo”.
			section
÷After completion of the settings, the set contents will be
	displayed by scrolling.

(Center speaker setting =Surround speaker setting = Delay time setting= “Press 'ENTER' to Save”)

To start surround play, select surround playback with the LISTEN MODE key or SOUND CONTROL jog dial.

E

Delay time

This refers to the difference in timing of the sound output from the surround speakers with respect to that output from the front speakers. The delay time setting consists of adjusting this difference in time.