System connection
7
Accessories
FM indoor antenna | AM loop antenna | Remote control unit (1) |
(1) | (1) | Batteries (R6/AA) (2) |
AC plug adaptor (1)
Use to adapt the plug on the power cord to the shape of the wall outlet.
(Accessory only for regions where use is necesary.)
UnpackingUnpack the unit carefully and make sure that all accessories are put aside so they will not be lost.
Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately. If your unit was shipped to you directly, notify the shipping company without delay. Only the consignee (the person or company receiving the unit) can file a claim against the carrier for shipping damage.
We recommend that you retain the original carton and packing materials for use should you transport or ship the unit in the future.
Keep this manual handy for future reference.Speaker cords
Provided in the speaker package
Surround speaker system (Except for
Surround speaker (2) | Center speaker (1) |
Speaker cord (2) | Speaker cord (1) |
Speaker stabilizer (8) | Speaker stabilizer (4) |
section Preparation
Connection of the system accessories
CAUTION Note on ConnectionConnect the components as shown in the diagram.Only plug the power cord into a power outlet once connections are completed. The rear panel configuration is variable depending on the models (countries or area).
The accessory antenna is for temporary indoor use only. For stable signal reception we recommend using an outdoor antenna. Remove the indoor antenna if you connect one outdoors.
1Connect to the antenna terminal.2Locate the position providing good recep- tion condition.3Fix the antenna.ANTENNA
FM
75Ω
GND 
The supplied antenna is for indoor use. Place it as far as possible from the main system, TV set, speaker cords and power cord, and set it to a direction which provides the best reception.
ANTENNAAssemble.
FM
75Ω
GND 
AM
1 
2 
3 
AM