Let's record 33
To pause recording (Main unit only)
Lights
REC/ARM
÷Pressing the key pauses recording after leaving a
÷If the key is pressed again in less than 4 seconds after it has been pressed, recording resumes from that instant.
Selection of the reverse mode (Main unit only)
REV. MODE
Each press switches the modes as follows.
1 “ ” .... Recording stops after having re-
corded both sides of tape.
2“ ” ... Recording stops after having re-
corded both sides of tape.
3“ ” ..... Recording stops after having re-
corded one side of tape.
÷When the “2” transport direction indicator is lit, recording always stops after having recorded one side of tape.
Selection of DOLBY NR (Noise Reduction)
(Main unit only) (XD-7...series, XD-8...series only)
The DOLBY NR system minimizesthe hissnoise heard when playing tape. When playing a tape prerecorded with DOLBY NR ON, be sure to set the DOLBY NR ON for playback.
Lit when “DOLBY NR” is ON.
DOLBY NR
Each press switches the modes as follows. 
1 “1NR” ON .... DOLBY NR is used.
2“1NR” OFF ... DOLBY NR is not used.
÷Select the DOLBY NR mode according to the recording condition of the tape.
Dolby noise reduction manufactured under license from Dolby Laboratories.
“DOLBY” and the
section Basic
Select an input source other | 4. Select the source to be recorded. | ||
|
|
| |
than “TAPE”. |
|
| 1 TUNER (Radio) |
|
|
| |
|
|
| |
2CD
3TAPE (This source cannot be recorded.)
INPUT |
|
| 4 MD/DVD (External input) |
| |
|
|
|
| ||
| 4 |
| (Input level adjustment Q) | ||
|
| C D 0 1 | 1 :21 | ÷ If a disc has already been loaded | |
|
|
| when the CD input is selected, it | ||
|
|
|
|
| |
|
|
| The input source component to | will starts to play automatically. In | |
|
|
| this case, press the stop (&) key to | ||
|
|
| be recorded should be displayed. | ||
|
|
|
|
| stop it. |
5.Start recording.
1Start recording.
2Play (or tune) the input source to be recorded.
REC/ARM |
|
|
| ÷ Even if deck A is selected, it is | ||
5 |
| Lights |
|
|
| |
|
|
|
|
| automatically switched to deck B | |
|
|
|
|
| at the start of recording. | |
|
|
|
|
|
| |
|
|
|
|
|
| ÷ Recording stops automatically |
|
|
|
|
|
| when the tape side(s) to be re- |
|
|
|
|
|
| |
|
|
|
|
|
| corded have been fully recorded. |
÷ Press the stop (&) key of the cas- | ||||||
|
|
| sette deck unit to stop recording. | |||