Kenwood Adjusting the recording level, Restarting recording, + 1:+ 1MHz, A D J U s T, position, ing” until step, middle of recording, 3To restart recording

34

Adjusting the recording level

1Perform the procedure of “Record-

ing” until step 4. ¤

2Adjust the recording level.

LEVEL

ADJUST

section	3To restart recording
Preparation	REC / ARM

	Restarting recording
	The following procedure allows to re-record sound from the
	middle of recording.
	The following procedure assumes the presence of a non-
	recorded section of 4 seconds before the recording start
section	position.
	1Press the key during recording.
Basic		When the tape is
		moving 2 way.
	1	¡￿
	When the tape is
	moving 3 way.
section	2Return the recording source compo-
	nent to the position you want to
	restart recording, and put the source
Application	component to pause mode.
	3Press the REC/ARM key twice.

REC / ARM

sections
Knowledge	4Press the REC/ARM key once.
	Lights
	REC / ARM

5Play (Receive) the music to be re- corded.

Let's record

XD SERIES (En/E2)

							The adjustment		range			is
							between -2 ~ +2.
									PROG. MUTE				N.B.
PGM	MEMO	EDIT RDS EON		TA NEWS INFO.	TP	P Y	TOTAL SPACE
AUTO	DISC	ALL	A D J U s T				+ 1:+ 1 MHz		6	7	8	9	10
									12
TUNED	STEREO							kHz		2	3	4	5
									1
		MAX							11	12	13	14	15
			SLEEP	O.T.T.	ECHO	P.B.C.	EQ. MANU.		16
										17	18	19	20
							ON

÷If the recorded sound is too large or distorted, decrease the recording level. If it is too low, increase the recording level.

÷Recording is stopped, the tape is returned to the recording start position, and the deck enters stop mode after leaving a non-recorded section of about 2 seconds after the previous music.

÷If there is no music recorded before the recording start position, the deck enters stop mode after tape rewinding.

Blinks.	In a few sec., REC/ARM and
	PAUSE keys light up.
	8
REC / ARM	REC / ARM PAUSE

÷The deck enters record-pause mode after leaving a non-recorded section of about 4 seconds.

÷In case recording is restarted from the beginning of a tape, feed the leader tape (the non-recordable section at the beginning of each side of tape) manually before starting recording.

÷When recording a CD, the CD playback and tape recording can be started simultaneously by pressing the CD play (6) key in step 4.