Operation of remote control unit

1 9

XD-8550/XD-6000 (En/T)

Loading batteries
1 Remove the cover.2 Insert batteries.3 Close the cover.

÷Insert two R6 (“AA”-size) batteries following the polarity indications.

OperationPlug the power cord of the amplifier unit (A-H5) into a

power outlet and press the ON/STANDBY ( ) key of the remote control unit to turn power ON. When the power is turned ON, press the desired operation keys.

To turn power off, press the (on/standby) key again. The system enters the standby mode in which only the time display is lit.

÷When pressing more than one remote control keys successively, press the keys securely by leaving an interval of 1 second or more between keys.

Remote sensor

6 m

30° 30°

Model: RC-H7R

Infrared ray system

Operating range (approx.)

section Preparation

 

1.

The provided batteries are intended for use in operation checking, and their service life may be short.

Notes

2. When the remote controllable distance becomes short, replace both of the batteries with new ones.

3.

If direct sunlight or the light of a high- frequency fluorescent lamp (inverter type, etc.) is incident to the remote sensor, malfunction may occur.

In such a case, change the installation position to avoid malfunction.

section Application

sections Knowledge