Kenwood XD-6000, XD-6550, XD-8050, XD-8550 Giving preference to the tape length over the title sequence, C, (Time edit recording), C D * * * * C -;, 4Start edit recording, 2Light the “EDIT” indicator

Convenient CD recording 5 5

XD-8550/XD-6000 (En/T)

Giving preference to the tape length over the title sequence(Time edit recording)

When the tape recording time is specified, recording is executed with changing the title sequence so that no title will be interrupted when the tape direction is changed at the end of one side.

When equalizer, SRS 3D or another effect is applied to the sound, the sound with the applied effect can

be recorded.

Character information indicators cannot be displayed while Note the spectrum analyzer display is used. Switch to the dual display or character display mode to see the information.

!´

Recording preparations are required. ¤For the reverse mode, select “”” ,“[”(two-way recording).

1Press so that the “PGM” indicator goes off.

P.MODE

2Light the “EDIT” indicator.

EDIT

If more than 8 seconds have elapsed, select the mode again.3Enter the disc and tape conditions.

1Enter the disc No. (DP-MH5 only)

DISC SKIP

Go to step 2 within 8 seconds.

2Press the EDIT key. (DP-MH5 only)

Go to step 3 within 8 seconds.

3Enter the recording length of the tape.

1 2 3

4 5 6

7 8 9

PTY

0 +10

Should be OFF.


PGM	MEMO	EDIT	C D *
AUTO	DISC	ALL	C D *
TUNED	STEREO
		MAX
			SLEEP	O.T.T.

Lights

PGM	MEMO	EDIT	D _	N
AUTO	DISC	ALL	D _
TUNED	STEREO

÷When pressing the EDIT key, “SPACE” indicator also lights up with “EDIT” indicator. To cancel the auto-space function, press the SPACE

key.‡q


For XD-8550	PGM MEMO EDIT D 1		C - - -
For XD-6000	PGM MEMO EDIT	*C D * * * C -;- -**		EQ. ON MUTE

÷The recording time is 99 minutes maximum.

÷Up to 32 tracks can be edited.

÷CD tracks will be edited automatically onto tape sides A and B. After editing, the “EDIT” indicator stops blinking and starts to light steadily.

Press the numeric keys as shown below. 30-minute tape : 000)46-minute tape : 00006

46-, 54-, 60- or 90-minute tapes can be selected simply by pressing the TIME key for the required number of times. (The recording time can be adjusted in 1-minute steps with the 4 and ¢ keys.)

After entry, press the EDIT key then proceed to step 4.

section Application

4Start edit recording.

Note

Wait until the “EDIT” indicator stops	During recording: X-H5
Wait until the “EDIT” indicator stops
blinking, and then press the CCRS key.	Blinks	Lights
Blinks
	CCRS	REC / ARM
CCRS
	÷ The tape and CD stop automatically when recording has completed.

Depending on the combination of conditions from CD contents (number of titles and length of the titles) and tape recording time, interruption of a title may not be avoidable. In such a case, the respective title will not be recorded.