Kenwood XD-6000, XD-6550, XD-8050, XD-8550 Twin recording (For XD-8550), 2Select the disc, Start edit recording, 3Start edit recording, To end recording in the middle, TWIN REC, “DIGITAL”

5 8

Twin recording (For XD-8550)

This function allows to record CD sound simultaneously on a tape and MD. All tracks on a CD can be recorded in the same order as they are recorded on the CD.

When recording sound from the MD recorder to a cassette deck, be sure to read the instruction manual of the optional MD recorder (DM-F70).

For XD-8550

Convenient CD recording

XD-8550/XD-6000 (En/T)

Recording preparations are required. ¤For the reverse mode, select “”” ,“[”(two-way recording).

1Press so that the “PGM” indicator goes off.

section
Preparation	P.MODE

2Select the disc.

DISC SKIP

Go to step 3 before playback starts.

3Start edit recording.

section	TWIN REC
Application

Should be OFF.

PGM	MEMO	EDIT	C D *
AUTO	DISC	ALL
TUNED	STEREO
		MAX
			SLEEP	O.T.T.

÷The recording input of the MD recorder is set automatically to “DIGITAL”.

Selected disc No.

PGM	MEMO	EDIT	RDS EON	TA NEWS INFO.	TP	PTY	TOTAL SPACE		PROG. MUTE				N.B.
AUTO	DISC	ALL	D 1 * ) 1 * * ):) 2 MHz						6	7	8		9	10
									12
TUNED	STEREO							kHz	1	2	3		4	5
		MAX							11	12	13		14	15
			SLEEP	O.T.T.	ECHO	P.B.C.	EQ.	MANU.
									16	17	18	19		20
							ON

During recording: X-H5

Blinks Lights

CCRS REC / ARM

÷The recording level and bias will be adjusted automatically in approx. 60 seconds (variable depending on CD contents), after which recording starts.

÷The CD tracks are recorded in the order they are recorded on the CD.

÷The tape and CD stop automatically when recording has completed.

Knowledge sections

To end recording in the middle

		7
		÷ Both the cassette deck and CD player stop.
	1. When the TWIN REC key is pressed during playback of CD, the playback stops and the CCRS setting (preparing edited recording) starts.
Notes	2.	The automatic recording level setting in the edit recording is based on a suitable section for recording level setting in the loaded CD.
	3.	If the deck is set for one-side recording (“), the processing at the tape end is applied only on side A.