6 8 Clock adjustment
When the AC cord is connected to a receptacle, the clock display starts to flash. Set the correct time following the instructions.
Time display is made only when the unit is switched off.
Ensure that the unit is OFF.
Adjust the clock before setting the timer.
1Activate the clock adjustment mode.
AUTO
2Enter the figure of hour.
1 |
|
|
|
|
|
|
| UP | MULTI CONTROL |
|
|
|
| |
|
|
|
| /VOLUME |
|
| W | N |
|
| O |
|
| |
|
|
|
| |
To decrease |
|
|
| To increase |
the figure |
|
|
| the figure |
2 |
|
|
|
|
sectionApplication |
|
| ENTER |
|
|
|
|
|
3Enter the figure of minute.
1
|
|
| UP | MULTI CONTROL |
|
|
|
| /VOLUME |
|
| W | N |
|
| O |
|
| |
|
|
|
| |
To decrease |
|
|
| To increase |
the figure |
|
|
| the figure |
2
ENTER
Example: Adjustment to 8:45
A M 1 2:) )
÷The time display starts to blink.
A M 8:) )
÷The time of the day is represented in
÷Press the ENTER key. The hour is entered and the minute display starts to blink.
A M 8:4 5
÷If you make a mistake, restart from the beginning.
÷To adjust correct time, press the ENTER key at the same moment as a time announcement.
÷The time display flashes when a power failure has occurred or when the power plug has been pulled and inserted again. In such a case, set the clock again.