Kenwood XD-980MD Dividing a track Track Divide, Play the track to be divided, Divide ?, Combine ?

5 8

Dividing a track (TRACK DIVIDE)

Use the following procedure to divide a track into two by inserting a track number in its middle. For example, by in- serting an additional track number before the passage you are specially fond of, it is easy to skip to there when you play the disc later. Note that the track numbers of the tracks located after the divided track are automatically incremented.

MD Edit Functions

XD-980MD (En)

￿

1Play the track to be divided.

2Press the TRACK EDIT key at the desired position.

1Select “DIVIDE”.

TRACK EDIT

2Set it.

S

E

T

3Execute the track divide operation.

section	E
Application	N
	T
	E
	R

Up to 255 track numbers can be inserted additionally by repeat- ing 1 to 3 for each of them.

4After editing, eject and remove the mini disc.

÷This operation is also possible during play-pause.

Each press switches the operation.

1 DIVIDE ?	(Dividing a track)
2 COMBINE ?	(Combining tracks)
3 ERASE ?	(Erasing one track)

4Editing cancelled

D I V I D E	L	∞ 30
	?R		10	5	3	1	0	(−dB)
0 0 1 < > 0 0 2	?R	∞ 30	10	5	3	1	0	(−dB)
	L

÷Editing is aborted if no operation has been performed for 8 seconds.

Should be approx. 2 sec. or longer.

1	2			3
A			B		C
					Track	number	is
1	2	3		4	incremented.
A		B			C
			Divided track (second half)
	Divided track (first half)
C O M P L E T E					!R	∞ 30 10 5	3 1 0 (−dB)
					L

÷The track is divided into two tracks.

÷Playback starts from the track made from the second half of the divided track.

÷There is no blank space left between the two tracks.

÷When the track to be split has a title, the two tracks will have the same title.

“WRITING” displayed during the mini disc ejection opera- tion indicates that the data associated with recording or editing is being written on the disc. Do not apply vibration or shock to the unit while this message is displayed.