Kenwood XD-980MD instruction manual Erasing a part of a track

MD Edit Functions 6 1

XD-980MD (En)

￿

4After editing, eject and remove the mini disc.					“WRITING” displayed during the mini disc ejection opera-
					tion indicates that the data associated with recording or
					editing is being written on the disc. Do not apply vibration
					or shock to the unit while this message is displayed.
Image of erasing one track			Track to be erased
(TRACK ERASE)	1	2	3	4	1	2	3
	A	B	C	D	A	B	D
					Track Nos. are adjusted.

Erasing a part of a track

1Turn the part to be erased into one track by using the TRACK DIVIDE function.

2Erase it by using the TRACK ERASE function.

Use the following procedure to erase the desired part of a track.

1Turn the part to be erased into one track.

Use the TRACK DIVIDE function to turn the part you want to erase into one track.

Should be approx. 2 sec. or longer.

Should be approx. 2 sec. or longer.

12

A B

12

A B

Part to be erased

3

C

Execute TRACK

DIVIDE twice.

3 4 5

C

Application

2Erase the part to be erased.

Use the TRACK ERASE function to erase the “track” (part you want to erase) made in step 1.

3After editing, eject and remove the mini disc.

“WRITING” displayed during the mini disc ejection opera- tion indicates that the data associated with recording or editing is being written on the disc. Do not apply vibration or shock to the unit while this message is displayed.

The part divided with TRACK DIVIDE becomes one “track”.

TRACK DIVIDE I

÷If it is required to erase only the first or second half of a track, only one TRACK DIVIDE operation is enough.

Part to be erased

1	2	3	4	5
A		B		C
Execute TRACK ERASE
once.				Track No. is
1	2	3	4	adjusted.
A		B		C
	The space left after erasing is filled by sub-
	sequent tracks which move along.

TRACK ERASE P

section