Set-Up
Helpful Hints
1.Plug brewer into its own grounded outlet.
If the electric circuit is overloaded with other appliances, your brewer may not function properly. The brewer should be operated on its own circuit, separate from other appliances.
2.Keep your brewer turned “ON.”
To brew a fresh cup of coffee, tea or hot cocoa anytime you want, keep your brewer turned
“ON” all the time. However, you can set the brewer to automatically turn off two hours after your last brew. Follow the simple instructions on page 10 to make using the brewer convenient for you.
3.For the best tasting gourmet coffee, tea or hot cocoa, Keurig recommends using bottled or filtered water.
Water quality varies from place to place. If you notice an undesirable taste in your
cup of coffee, tea or hot cocoa (such as chlorine or other mineral tastes) we recommend you consider using bottled water or water from a filtration system. For best results, carefully follow manufacturer’s instructions when using any water filtration system.
4.Customize the size, flavor & brew that’s perfect for you.
With the choice of over 200 varieties of
5.Remove
Please see page 7 for brewing instructions.
6.Brewing into a travel mug.
To brew into a travel mug, simply remove the Drip Tray Assembly and place the travel mug on the Drip Tray Base.
7.
Please see pages 11 and 12 for instructions.
Unpacking Instructions
1.Place brewer box on a large steady surface (such as a table or countertop) or on the floor. Open the box.
2.Remove enclosed literature.
3.Turn the box on its side with front of box face down.
4.Reach into the box and grasp the plastic bag that contains the brewer.
5.Carefully pull the plastic bag (and packaging materials) toward you and out of the box. The brewer will still be encased in the polyfoam and be on its side.
6.Remove the top polyfoam packaging material.
7.Carefully lift brewer off of the bottom polyfoam and place it upright on a flat, steady surface.
8.Lift plastic bag off of brewer.
9.Record the serial number for this brewer on page 3 of this guide. The serial number can be found on the bottom of the brewer box or on the brewer behind the Drip Tray (when removed).
10.Place the brewer upright on a flat, steady surface. Remove tape holding Water Reservoir in place.
We recommend you save all packing materials in case future shipping of the product is necessary.
WARNING:
Keep all plastic bags away from children.
4
