Keurig SS-700BK manual Hot Water/Rinse, To Rinse, To make Hot Water

Hot Water/Rinse

Your Brewer is equipped to dispense hot water to make hot chocolate, tea, soup, and more. Your Brewer is also equipped with a Rinse cycle to flush out residual flavors. The Rinse cycle will dispense about 4 oz. of hot water.

Note: We suggest to running the Rinse cycle before using hot water to flush out any residual coffee, tea or hot cocoa flavor.

To Rinse:

1.Place a cup or mug on the drip tray.

If you’ve just completed a Rinse or Hot Water cycle, proceed to step 4.

2.Lift the handle. The brewing chamber will open towards you; check to make sure there is no K-Cup®inserted.

3.Lower the handle to close the brewing chamber. When closed completely, the control panel will indicated READY.

4.Press Rinse. During the Rinse cycle, only the Rinse button will be lit. The control panel will display the word RINSE (see figure 11).

figure 11

Following the Rinse cycle, your Brewer will automatically fill and heat in preparation for the next cycle. Once the heat cycle is completed, the RINSE and HOT WATER buttons will remain lit for one minute. While buttons are lit, you can perform another Rinse cycle or dispense Hot Water without opening the brew chamber.

Note: To BREW directly after a Rinse cycle open the brewing head, insert a K-Cup and brew as normal.

To make Hot Water:

1.Place a cup or mug on the drip tray.

If you’ve just completed a Rinse or Hot Water cycle proceed to step 4.

2.Lift the handle. The brewing chamber will open towards you; check to make sure there is no K-Cup®inserted.

3.Lower the handle to close the brewing chamber. When closed completely, the control panel will indicated READY.

4.All brew-size icons will be displayed with your default size shown as a solid mug. To choose a different size, use the or buttons.

5.Press Hot Water. While the Hot Water cycle is in progress, only the Hot Water button will be lit. The control panel will display the words HOT WATER, as well as the serving size you selected (see figure 12).

figure 12

Following the cycle, your Brewer will automatically fill and heat in preparation for the next cycle. After the heating cycle is completed, you can perform a Rinse or another Hot Water cycle immediately for up to one minute. The RINSE and HOT WATER buttons will be lit. After this time the unit will return to Idle mode and OPEN HEAD will be displayed.

Note: To BREW directly after a Hot Water cycle open the brewing head, insert a K-Cup and brew as normal.

12