Programming
Setting the Clock
Setting the clock is optional. When the clock is set, the time will appear on the control panel. Note: You must set the clock if you plan on using the ONOFF TIME SET programming feature.
1.Press the Menu button. Programming options will appear on the control panel with CLOCK flashing. The word OFF will appear at the top of the control panel to indicate that the clock is not set (see figure 17).
Set Hours
Set Minutes
figure 17
2.Press or hold the 
button to scroll through the hours until you have reached the appropriate hour. Be sure the PM indicator is on if a PM time is desired.
3.Press or hold the 
button to scroll through the minutes until you have reached the desired minutes.
4.When you have reached the correct time, press the Menu button to set the time. Continue pressing Menu to scroll through the remaining programming functions to exit the programming mode.
5.The correct time should now be displayed on top of the control panel (see figure 18).
Clock set in READY Mode
figure 18
Note: Depending upon the Brewer’s current mode, other icons will be displayed as well.
Note: If power is interrupted to the Brewer, the clock will need to be reset. Follow the procedure above to reset the clock.
Programming On/Off Features
The Brewer provides three ways for you to enjoy gourmet coffee, tea or hot cocoa on your own schedule. It will take the Brewer approximately 3½ minutes to warm up from room temperature.
1.Leave it on all the time.
The Brewer can be left on all the time so that it is always ready to brew a fresh cup of gourmet coffee, tea or hot cocoa.
To turn the Brewer off at any time, simply press the power switch located on the right side of the Brewer.
Note: Although the clock remains on, if set, you cannot brew a cup of coffee, tea or hot cocoa if the brewer is off. Press the power switch to restore power to the Brewer. You will have to wait for the water to heat up before the Brewer is ready to brew.
15
