Page

KD-MSW4x2 Operating Instructions

»V label is for the vertical sync for RGBHV video

Black Connector: PCM

»For PCM digital coax audio

Control Connections

Decide how the KD-MSW4x2 will be controlled

If using an IR (Infrared) Extender, the wired IR, or an external Control System (via the RS-232 port on the KD-MSW4x2), make the appropriate connections

Power

Use ONLY the external power supply provided with the KD-MSW4x2 unit. Use of any other power supply VOIDS the Key DigitalWarranty and may

potentially damage the unit and any associated equipment.

Connect the external power supply provided with the KD-MSW4x2 to the jack on the rear panel of the unit.

Connect the power supply to an appropriate source of power, such as from a wall outlet.

Operation

Follow all manufacturer instructions for the safe and proper operation of the source and display products that have been connected to the KD-MSW4x2.

Using one of the convenient control options for the KD-MSW4x2, separately select source input 1, 2, 3, or 4 for output display 1, and source input 1, 2, 3, or 4 for output display 2.

Use the IR remote control with an extensive command and control capability.

See the description for the IR remote control provided later in this Operating Manual.

It is also possible under RS-232 control to allow any one of the four inputs to be switched and distributed to both outputs [see the RS-232 Command List].

Input 1, 2, 3, and 4 LED indicators

Use this front-panel pushbutton to select any of the up to four source input devices to drive the display and audio system wired to Output 1. Press the button and cycle through Input 1, 2, 3, and 4.

Repeat for Output 2 using the appropriate Output 2 pushbutton and LEDs for monitoring the input selection.

Note: Since the KD-MSW4x2 Matrix Switcher does NOT perform video processing, the output video format is the same as the input video format. This means that the video resolution is not changed and also that form of video is input to the unit, for example Component Video, the output will be in exactly the same format.

Page 

KD-MSW4x2 Operating Instructions

Additional Product Features

Several new features have been added to this generation of Key Digitalswitchers, called “Fade-to- Black” and “Video Mute.” Both of these features let the user switch like a pro, like in a live studio.

Fade-to-Black

The Fade-to-Black feature allows for switching between input/output combinations without the usual visual signal noise, glitches, and sync roll that traditionally accompany switching between video signals. The feature momentarily forces the video image to black as the desired source input is selected for the chosen output. This feature is applied automatically and the fade time interval is programmable via RS-232.

Video and Audio Mute

Video and Audio Mute enables the user to mute the audio and video signal (the display goes to black) at the chosen output, using the RS-232 [see the RS-232 Command List] or IR remote control. Using the IR remote control for Video and Audio Muting:

Activate Video & Audio Mute:

R1 output (1~2)

up arrow

Deactivate Video & Audio Mute:

R1 output (1~2)

down arrow

Page 4
Image 4
Key Digital KD-MSW4X2 operating instructions Control Connections, Additional Product Features