Page 22
KD-MSW4x2 Operating Instructions
IR Extender
A rear-panel IR sensor is provided, ideal to use with an IR Extender, like one provided by Xantech. The rear panel IR sensor also supports the IR remote control provided with the KD-MSW4x2 unit.
Mount the IR extender on the rear panel of the KD-MSW4x2 unit, or connect the wired serial connector cable to the wired IR connector jack on the rear panel.
Wired IR
A rear-panel wired IR serial connector is provided for use with an IR Extender, like one provided by Xantech. Connect the wired IR Extender to the 3.5 mm jack on the rear panel of the KD-MSW4x2 unit.
Page 23
KD-MSW4x2 Operating Instructions
Applying Power
CAUTION: No other power supply adapter can be used with the KD-MSW4x2 unit. Use only the Power Supply provided in the carton! Using a power supply other than the one provided by Key Digital“ with the unit VOIDS THE WARRANTY, may cause damage to the unit and associated equipment, and is a potential safety hazard.
Now that the A/V input and output interfaces are completed, it is recommended to double check all cables and connections before applying power.
Always test all connections and final operation first, before sealing cables behind walls or completing difficult wire routings.
To test connections before routing or hiding any wires behind walls or ceilings, use a reliable source (like a DVD player) and display that is known to be functioning properly.
Carefully insert the Power Supply adapter plug here
Once all the connections have been verified, plug the connector of the Power Supply into the power supply input jack on the rear panel of the KD-MSW4x2 unit.
Next, plug the external Power Supply provided with the unit into an appropriate wall outlet or source of AC power. The external power supply is rated: + 6V DC @ 5 Amps, 110-240 VAC, 50-60 Hz. For added safety and protection it is recommended to use a good quality surge protector.
The KD-MSW4x2 unit has no physical On/Off switch, except on the provided IR remote control.
