Moving Instructions
CAUTION! TO REDUCE THE POSSIBILITY OF INJURY WHILE LIFTING, BEND YOUR LEGS AND KEEP YOUR BACK STRAIGHT. AS YOU LEAN THE UNIT, LIFT USING YOUR LEGS, NOT YOUR BACK.
With the elliptical tracks in the locked position(safety latch is engaged), grasp the console tube and place one foot on the base as shown in Figure 1. Next, with a firm grasp on console tube, place one foot on the center of the base of the mainframe and carefully tilt the unit back until it rolls freely on the transport wheels. Using extreme caution, move the unit to the desired location as shown in Figure 2. To set the unit down, place one foot on the center of the base of the mainframe and carefully lower unit onto base in a resting position. Do not attempt to move the unit over an uneven or rough surface.
Figure 1 | Figure 2 |
19
