To stop your training:
Training with PRESET function datas:
As soon as the preset function data counts down to zero,(pulse figures excluded) the computer has 8 beep sounds to alert you. At this moment, the computer will stop working. You may press START/STOP button to start the computer working and counting up from the previous data.
Interupt training:
You may press START/STOP button to stop the computer during training at any time.
To reset program:
You may press RESET button to reset the PROGRAM and select the training mode and tension load or difficulties under STOP mode. If you hold on pressing the RESET button for 2 seconds, all data (including personal data) will be reset.
BUTTON FUNCTIONS:
START/STOP | To start or stop training. |
MODE | To select each function of Time, |
| Distance and Pulse. |
UP | To increase data or tension. |
DOWN | To decrease data or tension. |
RESET | 1. To reset each function of Time, |
| Distance and Pulse figures. |
| 2. To reset program setting and back to |
| initial selection mode with Manual, |
| Program, User or Target Heart Rate |
| (all blinking display). |
RECOVERY | Press the button to activate heart rate |
| recovery function. |
18
