Chapter 2 Getting to Know the Cisco Digital Media Encoder 2200
Encoder Preset (A, B, and C)
By clicking on the B and C buttons on the encoder graphic, you can assign encoders to the EZStream buttons in the same way, as shown in the following diagram.
Note It is not possible to assign the same encoder to two EZStream buttons simultaneously. If an encoder is already assigned to a button and you assign it to another button, the encoder will remove the association to the previous button in favor of the most current request.
View All Encoders
After assigning encoders to the A, B, and C buttons, the Presets column on the All Encoders page updates to reflect these changes.
Edit Preset Encoder Profile
After assigning encoders to the EZStream buttons, you can access the encoder editing page by clicking the button Edit Encoder link at the bottom of the Preset page.
The following sections show what each encoding format property page looks like. For more information on setting up each type of encoder, see the “Editing an Encoder Profile” section on page
•AVI Encoder Properties, page
•Flash Encoder Properties, page
•
•Real Encoder Properties (Helix), page
•Windows Media Encoder Properties, page
| User Guide for Cisco Digital Media Encoder 2200 |
|
