English
Receiving Radio Broadcasts
You can browse through all the stations or use the preset function to go immediately to a particular station.
Tuning in Stations Manually
On the front panel only:
TUNER/BAND
1. Press TUNER/BAND.
The indicator above the button lights up.
Each time you press the button, the band alternates between FM and AM (MW/LW).
2. Press Control % / Þuntil
3.Press Control @/ # until you find the frequency you want.
• Pressing Control @ decreases the frequency.
• Pressing Control # increases the frequency.
Using Preset Tuning
Once a station is assigned to a channel number, the station can be quickly tuned. You can preset up to 40 stations at random.
To store the preset stations
On the front panel only:
1.Tune in the station you want to preset (see above). If you want to store the FM reception mode for this station, select the FM reception mode you want. See page 17 for details.
2. Press MEMORY. | MEMORY |
The channel number starts flashing on the display for about 5 seconds.
3.Press Control @ / #to select a channel number while the channel number position is flashing.
•Pressing Control @decreases the number.
•Pressing Control #increases the number.
4. Press MEMORY again while the selected channel | MEMORY |
number is flashing on the display. |
|
The selected channel number stops flashing.
The station is assigned to the selected channel number.
Notes:
•When you hold down Control @ / # in step 3, the frequency keeps changing until you press Control @/ #again or a station is tuned in.
•When a station of sufficient signal strength is tuned in, the TUNED indicator lights up on the display.
When an FM stereo program is received, the STEREO indicator also lights up.
CAUTION:
The preset channels may be erased in the following cases:
•When you press 
POWER to set it in the ÑOFF position.
•When you unplug the power cord.
•When a power failure occurs.
Note:
You can press 10 keys on the remote control to select a channel number in step 3, if you have pressed TUNER/BAND on the remote control prior to starting this preset procedures.
•For channel number 5, press 5.
•For channel number 15, press +10 then 5.
•For channel number 20, press +10 then 10.
•For channel number 30, press +10, +10, then 10.
15
