English
From the remote control:
Before starting the procedure below, make sure you have selected FM station only using the remote control. If not, the following RDS operating buttons do not work for tuner operation. (Pressing TUNER/BAND activates the remote control for tuner operation.)
1.Press PTY SEARCH while listening to an FM station.
“PTY” and “SELECT” alternate on the display.
2.Press PTY SELECT +/– until the PTY code you want appears on the display.
The display gives you the PTY codes described on page 21.
3.Press PTY SEARCH again.
While searching, “SEARCH” and the selected PTY code alternate on the display.
The receiver searches 40 preset channels, stops when it finds the one you have selected, and tunes in that station.
To continue searching after the first stop:
Press PTY SEARCH again while the indications on the display are flashing.
If no program is found, “NOTFOUND” appears on the display.
To stop searching any time during the process:
Press PTY SEARCH while searching.
PTY SEARCH
–PTY SELECT +
PTY SEARCH
PTY SEARCH
20
