Adjusting the Volume

On the front panel:

 

 

MASTER VOLUME

To increase the volume, turn MASTER VOLUME

 

 

clockwise.

+

 

 

To decrease the volume, turn it counterclockwise.

 

 

 

 

 

When you turn MASTER VOLUME rapidly, the volume

 

 

level also changes rapidly.

 

 

When you turn MASTER VOLUME slowly, the volume

 

 

level also changes slowly.

 

 

 

 

 

From the remote control:

To increase the volume, press VOLUME +.

To decrease the volume, press VOLUME –.

VOLUME

+

 

 

 

Selecting the Front Speakers

 

 

 

On the front panel only:

 

SPEAKERS

 

 

 

 

When you have connected two sets of front speakers, you

1

2

 

 

 

 

can select which to use. Pressing SPEAKERS 1 or

_ON ÑOFF

 

SPEAKERS 2 activiates the respective set of speakers.

 

To use the set of speakers connected to the FRONT SPEAKERS 1 terminals, press SPEAKERS 1 to set it in the _ON position, and press SPEAKERS 2 to set it in the Ñ OFF position.

To use the set of speakers connected to the FRONT SPEAKERS 2 terminals, press SPEAKERS 2 to set it in the _ON position, and press SPEAKERS 1 to set it in the Ñ OFF position.

To use both set of speakers, press both SPEAKERS 1 and 2 to set them in the _ON position.

To use neither set of speakers, press both SPEAKERS 1 and 2 to set them in the Ñ OFF position.

Muting the Sound

From the remote control only:

Press MUTING to turn off the sound through all

speakers and headphones connected.

MUTING

“MUTE” appears on the display and the volume turns off.

To restore the sound, press MUTING again.

Turning MASTER VOLUME or pressing VOLUME +/– also restores the sound.

English

CAUTION:

Always set the volume to the minimum before starting any source. If the volume is set at its high level, the sudden blast of sound energy can permanently damage your hearing and/or ruin your speakers.

Note:

The volume level can be adjusted within the range of “0” (minimum) to “62” (maximum).

Notes:

When only one set of the front speakers is connected to either the FRONT SPEAKERS 1 or 2 terminals, do not press both SPEAKERS 1 and 2 to set them in the _ON position. If you do, no sound comes out of the front speakers.

The SPEAKERS 1 and 2 do not affect the sound output of the center and rear speakers.

10

Page 15
Image 15
JVC RX-554RBK On the front panel only, From the remote control only, Adjusting the Volume, Selecting the Front Speakers