Basic Settings
Some of the following settings are required after connecting and positioning your speakers in your listening room, while others will make operations easier.
English
Adjusting the Front Speaker Output Balance
If the sounds you hear from the front right and left speakers are unequal, you can adjust the speaker output balance.
On the front panel only:
1. Press SETTING so that the Control % / Þ/ @/ # | SETTING |
buttons work for adjusting the balance. |
|
The lamp above the button lights up.
2. Press Control % / Þ until “BALANCE” appears on the display.
3. Press Control @/ # to adjust the balance.
• Pressing Control @decreases the right channel output.
• Pressing Control #decreases the left channel output.
Listening at Low Volume (Loudness)
Human ears are not sensitive to bass at low volume. To compensate for this, the Loudness function automatically boosts the bass level as you lower the volume.
On the front panel only:
1.Press SETTING so that the Control %/ Þ/ @ / #buttons work for setting the Loudness function.
The lamp above the button lights up.
2.Press Control % / Þuntil “LOUDNESS” appears on the display.
3.Press Control @/ # to set the Loudness function to “ON” or “OFF.”
• Select “ON ” to activate the Loudness function.
The LOUDNESS indicator lights up on the display.
•Select “OFF” to cancel it. The indicator goes off.
Using the Sleep Timer
Using the Sleep Timer, you can fall asleep to music and know the receiver will turn off by itself rather than play all night.
On the front panel only:
1.Press SETTING so that the Control %/ Þ/ @ / #buttons work for setting the Sleep Timer.
The lamp above the button lights up.
2.Press Control % / Þuntil “SLEEP” appears on the display.
3.Press Control @/ # to set the
Each time you press the button, the
10
20
30
40
50 
60 
70 
80 
0
(Canceled)
Note:
If the balance is not set at the center, “BALANCE@” or “BALANCE #” will appear in step 2.
12
