Chapter 3 Using the Ease Menu and Niagara SCX Web Interface

Niagara SCX Web Interface

Deinterlace

The Deinterlace field has four drop-down choices. These choices are Off, Auto, Inverse Telecine, and Motion Adaptive, as you can see below.

In further explanation of each choice, please see the following definitions.

Off —Performs no deinterlacing of any kind.

Auto—Applies inverse telecine deinterlacing to all telecine video. Applies motion adaptive deinterlacing to all video that is not telecine. Switches dynamically between the two modes as the content changes. Available for NTSC video only.

Inverse Telecine—Applies inverse telecine deinterlacing to all telecine video. Performs no deinterlacing of video that is not telecine. Available for NTSC video only.

Motion Adaptive—Applies motion adaptive deinterlacing to all video.

Deinterlace settings are applied and stored per-device and are applied to all filters and pins associated with a device.

Motion Adaptive Deinterlace

Motion adaptive deinterlace is an algorithm for deinterlacing pure video (non-telecine) content. It detects which portions of the image are still, and which portions are in motion, and then applies different processing to each scenario.

Telecine and Inverse Telecine

Telecine video is NTSC video which was originally created on film at 24 frames per second. In the telecine conversion process, certain fields are repeated in a regular, recurring sequence. If a telecined sequence is viewed directly on a progressive screen, interlacing artifacts will be visible.

The process called Inverse Telecine is the reverse of Telecine — it drops the redundant fields and reassembles the video in a 24 fps progressive format. Interlacing artifacts are 100% removed. If the video is viewed at 24 fps, you will see the exact timing and sequencing that was on the original film. If the video is viewed at 30 fps, every fifth frame will be repeated. However, there will be no deinterlacing artifacts.

Telecine and inverse telecine only apply to NTSC video. They are not used for PAL and SECAM video. The Auto and Inverse Telecine buttons will be disabled when either PAL or SECAM is selected as the video standard.

Motion Threshold

Motion Threshold adjusts the threshold of difference from spatially- and temporally-related pixels, which are judged to be “motion.” If you enter a higher value, the number of pixels in motion will be greatly reduced. If you enter a lower value, the number of motion pixels greatly increases until the entire screen, more or less, is considered in motion. The recommended default is 16.

Sharp and Smooth Motion

When the Sharp Motion radio button is selected, detail in motion areas will be sharper, but at the expense of somewhat jagged diagonal edges.

 

User Guide for Cisco Digital Media Encoder 2200

3-26

OL-17938-01

Page 98
Image 98
Cisco Systems 2200 manual Deinterlace