Chapter 1 Installing the Cisco Digital Media Encoder 2200
Installation
Front Panel Diagram
You should familiarize yourself with the front panel controls for the Cisco Digital Media Encoder 2200. Besides the basic buttons for power, start/stop, up/down and menu access, there are also several indicator lights. Figure
Figure 1-2 Front Panel Diagram
Table 1-2 Front Panel Buttons and Lights
Item
Description
Control Buttons
Power | Pressing this button once will power up Niagara Pro II. When Niagara Pro II is powered up, |
| pressing this button once will power down the system. Pressing and holding for 5 seconds will |
| perform an immediate power off. |
|
|
EZStream Buttons | When an encoder profile is assigned to one of these buttons, pressing the assigned button and then |
| the Stream button will start the encoder. Pressing the assigned button and then the Stop button will |
| stop the encoder. |
Alarm Information
When the Alarm Light indicator is lit, pressing this button will provide a log of the most recent alarms recorded. Pressing the Enter button will clear these alarms from the log.
Menu
Pressing this button will activate the encoder menu on the LCD display.
Enter
Pressing this button will enter or accept the menu choice highlighted on the LCD display. It is used for menu operations.
Up/Down
These buttons are used for menu navigation on the LCD display.
User Guide for Cisco Digital Media Encoder 2200
| ||
|
