
Chapter 1 Installing the Cisco Digital Media Encoder 2200
Installation
9.The following buttons and their respective actions represent your choices:
•Press the <ENTER> button to select and continue.
•Press the Menu button to cancel and exit.
10.The next menu offers you the choice to enable DHCP for the network interface.
11.Using the <UP> and <DOWN> buttons, you can toggle the selection from the No to the Yes option. After you make your selection, press the <ENTER> button to input the change. The encoder will confirm that you wish to change this setting.
12.Press <ENTER> to confirm your choice. The encoder will return to the menu to select another individual setting to modify.
13.To input a static address for the IP address and/or Gateway, select either from the menu, and press the <ENTER> button.
14.Using the <UP> and <DOWN> arrow keys to increment numerical value, enter a static IP address.
15.Press the <STREAM> button to move to the next field.
16.When you have correctly entered the IP address or Gateway address, press <ENTER> to input the data into the encoder. When setting a static IP address, a screen will appear that will allow you to set the subnet address.
|
| User Guide for Cisco Digital Media Encoder 2200 |
|
| |
|
|
| |||
|
|
|
| ||
|
|
|
|