Assembly
Getting Started - The CardioZone E-CZ100 Elliptical will require some assembly. Unpack the box in a clear area. Remove packing material. Do not dispose of packing material until assem- bly is complete and unit is working properly. Place the unit on a clean level surface for assem- bly. Make sure there is easy access to an electrical outlet. Before assembling the unit should be placed as close as possible to its final location. Tools have been provided for use while assembling this product.
Figure 1
Step 1:
Secure rear stabilizer to the main frame using four M8x1.25- 16 screws and M8.2x18-2 flat washers on the top four holes, and three M10x1.5-20 bolts and M10x20-2 flat washers on the three holes located on the bot- tom of the rear stabilizer.
Figure 2
Step 1:
Figure 1 | |
M8X1.25-16 BOLT | |
M8.2X18-2 FLAT WASHER |
| M10X1.25-20 BOLT |
| M10x20-2 WASHER |
REAR STABILIZER | |
Figure 2 | TOGGLE WIRES |
Connect the toggle wire com- ing from the right handlebar to the toggle wire coming from the main frame.
Step 2:
Secure right handlebar to main frame using four M8x 1.25-16 screws. Attach the cover over the handlebar and secure using two M5x0.8-12mm screws.
RIGHT HANDRAIL
M5X0.8-12MM SCREW
COVER
