Assembly
Figure 4
Attach console tube to main frame. Slide tube down into main frame. Secure using three M8*50mm hex head bolts. Cable should extend through bottom and top of console tube.
Figure 5
Figure 4
M8*50mm HEX BOLT
Connect 7 Pin, 3 Pin and grounding cables. Refer To Figure 5 and 5a.
Attach console to console tube using four M5*12mm phillips head screws.
Note: Ensure that all wires are secure inside console. Be careful not to pinch wires.
3 PIN |
| 7 PIN |
CONNECTOR |
| CONNECTOR |
|
|
|
Figure 5a
GROUNDING
TERMINALS
Figure 5 |
7 PIN |
CONNECTOR |
3 PIN |
CONNECTOR |
2 GROUND |
CONNECTORS |
CONSOLE |
CABLES |
