Assembly
Step 3:
Connect the console harness from inside the left upright to the console harness from the base assembly as shown in Figure 3.
Next, attach left upright and right upright to base using Allen bolts M8x15 (Qty. 8) and washers 9x22x2 mm (Qty. 8). Do not tighten bolts all the way at this time.
Figure 3
CONSOLE HARNESS
ALLEN BOLT
WASHER
Step 4:
Attach the console assembly by connect- ing the console harness, incline harness, EKG harness, and speed harness as shown in Figure 4.
Next, attach the console assembly to the left and right uprights using Phillips screws M6x12 (Qty. 4).
Figure 4 | CONSOLE |
| |
PHILLIPS SCREW |
|
| WIRE HARNESS |
| UPRIGHTS |
7 |
|
