www.keysfitness.com
1
ASSEMBLY FOR UPRIGHT TUBES
6MM
TOOL
WASHER 9*16*1.6mm
Step 1:
After unpacking the box, lift up the upright tubes so that the screw holes are aligned.
Step 2:
Secure the upright connection with allen bolts M8*55 (Qty 6) and flat washers 9*16*1.6 mm (Qty 6) at the upright tubes. In the same area you will need to use allen bolts M8*15*15 (Qty 4) and flat washers 9*16*1.6 mm (Qty 4) to secure as well.
Note: Be careful not to pinch the wire
harness.
Note: Hand tighten bolts until console 
is attached and secure as indicated in page 8. Then tighten with tool provided.
WASHER 9*16*1.6mm
ALLEN BOLT M8*55
ALLEN BOLT M8*15*15
ALLEN BOLT M8*55
ALLEN BOLT M8*15*15
