Keyspan 1.9 installation instructions Connect the USB cable to the Adapter if necessary

Keyspan:High Speed USB Serial Adapter for Mac OS-v1.9 User Manual

Installing the Keyspan High Speed USB Serial Adapter Hardware

The following hardware installation instructions provide a basic overview on installing the Keyspan High Speed USB Serial Adapter in a USB port. For detailed instructions on how to connect USB devices your specific computer, please refer to the USB Device Install section in your computer's user's manual.

Step 4 - Connect the USB cable to the Adapter (if necessary)

If your Keyspan adapter does not have an attached USB cable, attach the included USB cable into the Keyspan adapter's USB port.

Step 5 - Connect the Adapter to your USB port

Attach the Adapter to your computer by connecting the Adapter's USB cable into any built-in USB port on your computer or USB Hub. It is not necessary to turn off your computer when attaching the Adapter.

Step 6 - Hardware Installation Complete!

Your Keyspan High Speed USB Serial Adapter is ready for use now that you have installed hardware and software.

Please proceed to the Configuring Your Serial Device section in this manual for instructions on what to do next.

This User Manual applies to the Keyspan High Speed USB Serial Adapter Software for Mac OS.

(rev 02may12JA)

Page 6