KX100.2 & KX200.4 Technical
Version 2.0
Page 13
LEFT SPEAKER(S)
System Diagrams
KX100.2 SAMS Mode
Manual
| LOW | ||
| PASS | ||
| CROSS- | ||
| OVER | ||
| + | ||
| 4 Ω | ||
| Min. | ||
MONO |
|
| _ |
| |||
SPEAKER |
|
|
|
|
|
|
|
| + |
|
2 Ω |
| HIGH PASS |
| CROSSOVER | |
Min. | _ |
|
|
|
2Ω | + | |
| HIGH PASS | |
Min. |
| CROSSOVER |
_ |
| |
|
| |
RIGHT SPEAKER(S)
GROUND
REMOTE 
18"
or less
+12V | FUSE |
BATTERY
When the amplifier is driving speakers in the configuration above, the crossover switch should be set to the OFF position. This will allow the speakers to play full range. The speakers will need passive crossovers in order to function properly. In the simpliest form, the subwoofer will need a coil and the high and midrange speakers will need a capacitor. These components will allow the speakers to play in a dedicated frequency range for the best sound quality.
SIGNAL IN
-
To Woofer
To Left Speaker
-
To Right Speaker
-
