KX100.2 & KX200.4 Technical Manual
Version 2.0
Page 14
System Diagrams
KX200.4 4 Channel
Stereo Mode
- | + | - | + |
+ | - | + | - |
|
| + | - |
GROUND
REMOTE
18"
or less
+12V | FUSE |
BATTERY
To Left Speaker
- | - |
To Right Speaker
To Right Speaker
- | - |
To Left Speaker
SIGNAL IN AMP 2
SIGNAL IN AMP 1
When AMP 1 or AMP 2 are driving speakers that do not require a crossover, the crossover switch may be set to the OFF position. This will allow the speakers to play full range.
OR...
If AMP 1 or AMP 2 are driving speakers that do require a crossover set the switch to HI PASS. This will allow only high frequencies to pass through the amplifier to the speakers.