To open walk through section, press down on top locking latch, lift walk through section so hinge is raised (a), and slide out of bracket.
Note: The gate should always be in locked position. If gate is open and excessive pressure is applied, hinge posts are desig- ned to break to prevent structural dama-
ge.
To close gate, lift walk through section and position safety foot onto frame, making sure hinge has dropped down (b). To lock gate, latch spindle at top must click under locking latch.
Safety foot
•No part of gate needs lubrication.
*Clean by sponging with warm water and mild detergent .
•Do not use abrasive cleaners or bleach.
•If using out doors, and to help prevent rust, treat all exposed metal on gate with a rust inhibitor. Some rusting may still occur.
9
