A.C. powered alarms will not operate if the A.C. power has been cut off, such as by an electrical fire or an open fuse.

Smoke alarms must be tested regularly to make sure the batteries and the alarm circuits are in good operating condition.

Smoke alarms cannot provide an alarm if smoke does not reach the alarm. Therefore, smoke alarms may not sense fires starting in chimneys, walls, on roofs, on the other side of a closed door or on a different floor.

If the alarm is located outside the bedroom or on a different floor, it may not wake up a sound sleeper.

The use of alcohol or drugs may also impair one’s ability to hear the smoke alarm. For maximum protection, a smoke alarm should be installed in each sleeping area on every level of a home.

Although smoke alarms can help save lives by providing an early warning of a fire, they are not a substitute for an insurance policy. Home owners and renters should have adequate insurance to protect their lives and property.

Install and maintain fire extinguishers on every level of the home and in the kitchen, basement and garage. Know how to use a fire extinguisher prior to an emergency.

8. GOOD SAFETY HABITS

DEVELOP AND PRACTICE A PLAN OF ESCAPE

Make a floor plan indicating all doors and windows and at least two (2) escape routes from each room. Second story windows may need a rope or chain ladder.

Have a family meeting and discuss your escape plan, showing everyone what to do in case of fire.

Determine a place outside your home where you all can meet if a fire occurs.

Familiarize everyone with the sound of the smoke alarm and train them to leave your home when they hear it.

Practice a fire drill at least every six months. Practice allows you to test your plan before an emergency. You may not be able to reach your children. It is important they know what to do.

WHAT TO DO WHEN THE ALARM SOUNDS

Leave immediately by your escape plan. Every second counts, so don’t waste time getting dressed or picking up valuables.

In leaving, don’t open any inside door without first feeling its surface. If hot, or if you see smoke seeping through cracks, don’t open that door! Instead, use your alternate exit. If the inside of the door is cool, place your shoulder against it, open it slightly and be ready to slam it shut if heat and smoke rush in.

Stay close to the floor if the air is smoky. Breathe shallowly through a cloth, wet if possible.

Once outside, go to your selected meeting place and make sure everyone is there.

Call the fire department from your neighbor’s home - not from yours!

Don’t return to your home until the fire officials say that it is all right to do so.

There are situations where a smoke alarm may not be effective to protect against fire as stated in the NFPA Standard 72. For instance:

a)smoking in bed

b)leaving children home alone

c)cleaning with flammable liquids, such as gasoline

Further information on fire safety can be obtained in a pamphlet titled “IN A FIRE SECONDS COUNT” published by the NFPA, Batterymarch Park, Quincy, MA 02269

9. NRC INFORMATION

Ionization type smoke alarms use a very small amount of a radioactive element in the sensing chamber to enable detection of visible and invisible combustion products. The radioactive element is safely contained in the chamber and requires no adjust- ments or maintenance. This smoke alarm meets or exceeds all government stan- dards. It is manufactured and distributed under license from the U.S. Nuclear Regulatory Commission.

10. NFPA REQUIRED PROTECTION

The National Fire Protection Association’s Standard 72 provides the following information:

Smoke alarms shall be installed outside each separate sleeping area in the immediate vicinity of the bedrooms and on each additional story of the family living unit, including basements and excluding crawl spaces and unfinished attics. In new construction, a smoke alarm also shall be installed in each sleeping room.

Smoke Detection - Are More Smoke Alarms Desirable? The required number of smoke alarms might not provide reliable early warning protection for those areas sep- arated by a door from the areas protected by the required smoke alarms. For this reason, it is recommended that the householder consider the use of additional smoke alarms for those areas for increased protection. The additional areas include the basement, bedrooms, dining room, furnace room, utility room, and hallways not pro- tected by the required smoke alarms. The installation of the smoke alarms in the kitchen, attic (finished or unfinished), or garage is normally not recommended, as these locations occasionally experience conditions that can result in improper opera- tion.

This equipment should be installed in accordance with the National Fire Protection Association’s Standard 72 (NFPA, Batterymarch Park, Quincy, MA 02269).

NOTIFY YOUR LOCAL FIRE DEPARTMENT AND INSURANCE COMPANY OF YOUR SMOKE ALARM INSTALLATION.

11.CAUTION (AS REQUIRED BY THE CALIFORNIA STATE FIRE MARSHAL)

“Early warning fire detection is best achieved by the installation of fire detection equipment in all rooms and areas of the household as follows. A smoke alarm installed in each separate sleeping area (in the vicinity of, but outside of the bed- rooms), and heat or smoke alarms in the living rooms, dining rooms, bedrooms, kitchens, hallways, attics, furnace rooms, closets, utility and storage rooms, base- ments and attached garages.”

Page 5
Image 5
Kidde 0916, 440375 Good Safety Habits, NRC Information, Nfpa Required Protection, Develop and Practice a Plan of Escape

0916, 440375 specifications

The Kidde 440375,0916 is a highly regarded smoke and carbon monoxide detector that combines advanced technology with user-friendly features, ensuring the safety of your home and loved ones. This device is designed to provide continuous monitoring of both smoke and carbon monoxide levels, providing crucial alerts in case of danger.

One of the standout features of the Kidde 440375,0916 is its dual detection capability. This model integrates a photoelectric smoke sensor, which is particularly effective at detecting smoldering fires that may produce large amounts of smoke without producing significant flames. This technology can lead to faster response times and a higher likelihood of escaping a dangerous situation.

In addition to smoke detection, this unit also includes a reliable electrochemical sensor for carbon monoxide detection. Carbon monoxide is a colorless, odorless gas that can be deadly in low concentrations, and the inclusion of this feature makes the Kidde 440375,0916 a critical addition to any home safety strategy. The electrochemical sensor is known for its accuracy and sensitivity, ensuring that even low levels of CO are detected promptly.

Another significant characteristic of the Kidde 440375,0916 is its user-friendly design. The unit includes a large digital display, providing clear visibility of current conditions and alerts. The display shows the levels of smoke and carbon monoxide, allowing users to gauge their environment easily. Additionally, this model features voice alerts that announce the type of danger present, whether it’s smoke or carbon monoxide, providing clarity in moments of panic.

The Kidde 440375,0916 also emphasizes ease of installation and maintenance. It is designed to be easily mounted on walls or ceilings, making it a versatile option for any room in the house. The unit comes equipped with a battery backup system, ensuring continued operation during power outages. Regular maintenance is made simple with a test/reset button, allowing users to regularly check the functionality of the device.

In conclusion, the Kidde 440375,0916 is a premium smoke and carbon monoxide detector that prioritizes safety through advanced detection technologies, user-friendly design, and reliable performance. It stands out as an essential tool for home safety, offering peace of mind to families and individuals alike. By including features aimed at enhancing user experience and ensuring prompt alerts, the Kidde 440375,0916 represents an excellent choice for comprehensive home protection.