Kingston Technology DT4000M-R manual Setup Windows environment, Device driver installation

Setup (Windows environment)

1.Insert the DT4000M-R into an available USB port on your notebook or desktop and wait for Windows to detect it.

•Windows Vista/7/8 users will receive a device driver notification as seen in Figure 2.1.

Figure 2.1 – Device driver installation

Once the new hardware detection is complete, Windows will prompt you to begin the initialisation process.

•Windows Vista/7/8 users will see an AutoPlay window similar to the one in Figure 2.2.

2.Select the option ‘Run DT4000M-R.exe’.

If Windows does not AutoPlay, you can browse to the CD-ROM partition (Figure 2.3) and manually execute the DT4000M-R program. This will also start the initialisation process.

Figure 2.3 – DT4000M-R contents

Figure 2.2 – AutoPlay window

(Note: Menu options in the AutoPlay window may vary depending on what programs are currently installed on your computer. AutoRun will start the initialisation process automatically.)

Document No. 480DT4000M-R.A01 Managed-Ready Solution Page 4 of 14