INSTALLATION
REQUIREMENTS
Tools and Parts
IMPORTANT:
■Observe all governing codes and ordinances.
■Installer: Leave Installation Instructions with homeowner.
■Homeowner: Keep Installation Instructions for future reference and for the local electrical inspector’s use.
■Keep cardboard shipping piece or plywood under refrigerator until it is installed in the operating position.
■Comply with installation specifications and dimensions.
■Remove any moldings or decorative panels that prevent the refrigerator from being serviced.
■Contact a qualified electrical installer.
Tools needed:
Make sure that you have the tools necessary for proper installation:
■ Hand drill or electric drill | ■ ⁷⁄₁₆ in. and ¹⁄₂ in. | ||
| (properly grounded) |
| wrenches |
■ | ¹⁄₄ in. nut driver and | ■ | Two adjustable wrenches |
| drill bit |
|
|
■ | ■ | Socket wrench | |
Parts needed:
■Your refrigerator dealer has a kit available with a ¹⁄₄ in. (6.35 mm)
■Or you can purchase a ¹⁄₄ in. (6.35 mm) copper tubing with shutoff valve and a ¹⁄₄ in. (6.35 mm) compression fitting (coupling).
■Depending on water line connections, you may also need a ¹⁄₄ in. (6.35 mm) nut and ¹⁄₄ in. (6.35 mm) ferrule.
Product Dimensions
Top View
351/2"
(90.2 cm)
235/8"
(60.0 cm)
271/4"
(69.2 cm)
293/8"
(74.6 cm)
| 151/2" |
|
|
|
| 191/2" |
|
|
|
|
| ||||
(39.4 cm) |
|
| (49.5 cm) | ||||
23/8"1
(6.0 cm)
1. Dimensions may vary based on model
Side View
211/8"
(53.7 cm) 
713/4"
1(182.2 cm)
717/8"
(182.5 cm)
711/2" 2
(181.6 cm)
561/8"
(142.6 cm)
35/8" (9.2 cm) |
|
|
| 1/4" (6.4 mm) | 3 |
|
|
|
1.Dimensions shown from floor with rollers set at minimum height
2.Overall cabinet height with rollers at maximum height
3.Minimum height
Front View
677/8"
(172.5 cm)
3511/16"
(90.6 cm)
35/8"
(9.2 cm)
3
