Attachments and Accessories
General Information
KitchenAid® Attachments are designed to assure long life. The attachment power shaft and hub socket are of a square design, to eliminate any possibility of slipping during the transmission of power to the attachment. The hub and shaft housing are tapered to assure a snug fit, even after prolonged use and wear. KitchenAid® Attachments require no extra power unit to operate them; the power unit is
| Attachment | Attachment | |
| Knob | ||
|
| Power Shaft‡ | |
| ® | Attachment | |
|
| Housing | |
Attachment |
|
| |
Hub Socket | Notch | Pin | |
‡Not part of mixer. | |||
Attachment Shaft | |||
| |||
| Housing |
| |
General Instructions
English
To Attach
1.Turn speed control to “O”.
2.Unplug Stand Mixer or disconnect power.
3.Loosen attachment knob by turning it counterclockwise.
4.Remove attachment hub cover.
5.Insert attachment shaft housing into attachment hub, making certain that attachment power shaft fits into square attachment hub socket. It may be necessary to rotate attachment back and forth. When attachment is in proper position, the pin on the attachment will fit into the notch on the hub rim.
6.Tighten attachment knob by turning clockwise until attachment is completely secured to Stand Mixer.
7.Plug into proper electrical outlet.
To Remove
1.Turn speed control to “O”.
2.Unplug Stand Mixer or disconnect power.
3.Loosen attachment knob by turning it counterclockwise. Rotate attachment slightly back and forth while pulling out.
4.Replace attachment hub cover. Tighten attachment knob by turning it clockwise.
13
