KitchenAid 5KICA0WH manual Assembling the Ice Cream Maker Attachment for Bowl-Lift Mixer, English

Assembling the Ice Cream Maker Attachment

for Bowl-Lift Mixer*

To Assemble Freeze Bowl and Dasher:

NOTE: Use the freeze bowl immediately upon removal from the freezer, as it

begins to thaw once removed. IMPORTANT: Do not pour ice cream

batter into the freeze bowl until all parts are assembled and the mixer is running.

1.Turn stand mixer speed-control to “O” (off) and unplug mixer.

2.Place bowl-lift handle in down position and remove mixing bowl.

3.Fit the freeze bowl into place over the locating pins.

4.Press down on the back of the freeze bowl until the bowl pin snaps into the spring latch.

NOTE: The freeze bowl is designed to fit all bowl-lift mixers. If the bowl pin at the back of the bowl is too short or too long to snap into the spring latch, remove and rotate the bowl so the opposite bowl pin faces the spring latch. Repeat steps 3 and 4.

English

Pin too

short

Correct

pin fit

5.Place the dasher inside the freeze bowl.

LOCATING

PIN

* For tilt-head mixer, see page 3 and 4.

5