Altemate Connection Methods
NoAir Gap
Iflocal codespermit,thedishwasherdrainhosemaybeconnected
direcOytoawasteteeorwastedispo .Drain hose (A) to waste tee (B)
Cutdrain endof drain hose asshown(C). Do Notcot fibbed
sectionto shortendrainhose(D).
Securedrain hose to wasteteewith spring- or screw-type
clamp (E). Ifspring-typeclamp does not fitsmaller sectionof
drain hoseconnector,usea smallerclamp. Smallerdamps are
availableatplumbingsupplystores.
Thewaste tee connection MUSTbe ahead of the drain
trap (F) and 20 inches (50.8cm) minimum above the
floor(6).
Drain hose (H) to disposer (I)
Knock out disposer inlet plug from inlet 0)- If inletplug
fallsinsidedisposer,youmust removeinletplug before
connec_ngdrainhose. If disposerisalreadyinstalledinsink,
youmay needto removedisposerfrom sinkto removeplug.
DONOTcutendof drain hose.
Securedrain hoseto disposer withspring-or screw-type
damp (X).
Mostdisposershave7/8"connectors,orspecial connectorsare
availableatplumbingsupplystores.
The disposer connection MUSTbe ahead of the drain
trap (L) and 20 inches (50.8cm) minimum above the
floor (M).
7