• Installa U.L-listed/t_-certiliedstrainrelief(F) to the terminal
box.Runpowersupplywirethroughstrainrelief,ffusingconduit,
use a U.L.-listed/CA_-certiffedconduitconnncmr.Runconduit
throughconnector.
��� Connectthewhitewire (G) from the power supplywire to the
whitewire inthe terminalboxwithtwist-onwireconnector.
•Connectthe blackwire (H) fi'omthepower supplywireto the
blackwire in the terminalboxwithtwist-onwireconnector.
Ifthe ground connector (I) looks like this:
• Loosenfront nut O) ongroundconnectorlocatedonthe backof
terminalbox.Do Notloosenthe rearnut(K) on the ground
connector.
• Form the baregroundwire (L) into a U-shapedhook. Wrap
groundwire hook clockwisearound ground connectorand
betweenthe rearandfront nuts. Securelytightenthefront nut (J)
overthe groundwire.
•Tightenstrainrelief orconduitconnector screws (M).
OR
II
®If the ground connector (i) looks like this:
• LoosenscrewO) onground connector locatedon the backof
terminalbox.
•Formthebareground wire (K) intoa U-shapedhook. Wrapground
wire hookclockwise around groundconnector and under the
washer(L).Securelytightenthescrew0).
• Tightenswainrelieforconduitconnectorscrews(M).
•Replaceterminalcover(E).
Installation steps cont. on page 9o