Trimless Panel without Handle
Dimensions
6.Attach a 15" x ¹⁄₂"
7.Reinstall the toe guard using the existing screws and ¹⁄₂" washer. Then, reinstall the foot pedal.
Use these dimension drawings to create a custom panel for use without a trim kit. The panel should be ¹⁄₂" (13 mm) min. thick.
25"
(63.5 cm)
15"
(38.1 cm)
Installation
A
C
B
C
1.Remove the mounting screws attaching the foot pedal to the compactor. Remove foot pedal.
A
A 
B
A. Mounting screws
B. Foot pedal
2.Remove mounting screws attaching the toe guard to the compactor. Remove toe guard.
3.Remove the mounting screws attaching the decorative panel to the compactor. Remove decorative panel and discard mounting screws.
4.Align the bottom of the custom panel with the bottom of the drawer front.
5.Secure the panel from the back using 4 – #8 x 1" wood screws as shown.
D 
E
F
A. Custom panel | D. Toe guard |
B. 15" x ¹⁄₂ " | E. Washer |
C. Panel screw locations | G. Toe guard screw |
9
