KitchenAid 9871780B manual Trimless Panel with Handle, Dimensions, Installation, A A B

Trimless Panel with Handle

Dimensions

Use these dimensions drawings to create a custom panel for use without a trim kit. The panel should be ¹⁄₂" to ⁵⁄₈" (13 mm to 16 mm) thick.

NOTE: A thicker panel may need rounded front corners and a cut-out for access to the handle.

6.Reinstall the toe guard using the existing screws and ¹⁄₂" washer. Then, reinstall the foot pedal.

A
B	C

	C
	23¹³⁄₁₆"
	(60.5 mm)
	D
15"	E
(38.1 mm)
	F

Installation

1.Remove the mounting screws attaching the foot pedal to the compactor. Remove foot pedal.

A. Handle	D. Toe guard
B. Custom panel	E. Washer
C. Panel screw	F. Toe guard
locations	screw

A

A

B

A. Mounting screws

B. Foot pedal

2.Remove mounting screws attaching the toe guard to the compactor. Remove toe guard.

3.Remove the mounting screws attaching the decorative panel to the compactor. Remove decorative panel and discard mounting screws.

4.Align the bottom of the custom panel with the bottom of the drawer front.

5.Secure the panel from the back using four #8 x 1" wood screws as shown.

8