Cleaning the Blade Coffee Grinder
1.Always unplug Coffee Grinder before cleaning.
WARNING
Cut Hazard
Handle blades carefully.
Failure to do so can result in cuts.
2.Remove the bowl and top cover. Wash in hot, soapy water, rinse and dry. Bowl and top cover can also be washed in the dishwasher (top rack only). After removing from dishwasher, allow to cool before assembling.
3.Wipe the motor housing clean with a damp, soft cloth. Do not use abrasive cleaners. Do not immerse the motor housing in water.
4.Wipe cord with warm, sudsy cloth; then wipe clean with damp cloth. Dry with soft cloth.
5.Reassemble your Coffee Grinder after cleaning.
ENGLISH
Troubleshooting
•If your Coffee Grinder should fail to operate, check the following:
–Check that both bowl and top cover are properly locked on base.
–Check that the Coffee Grinder is plugged into a proper electrical outlet. If it is, unplug the Coffee Grinder. Plug it back in to the same outlet. If the Coffee Grinder still does not work, check the fuse or circuit breaker on the electrical circuit the Coffee Grinder is connected to and make sure the circuit is closed.
If the problem cannot be fixed contact KitchenAid or an Authorized Service Center.
USA/Puerto Rico: 1-800-541-6390,
Canada: 1-800-807-6777,
Mexico: 01-800-024-17-17 (JV Distribuciones) or
See the KitchenAid Warranty and Service section on page 8 for additional details. Do not return the Coffee Grinder to the retailer – they do not provide service.
7
