3-Wire Cable from Power Supply

IMPORTANT: Use the 3-wire cable from power supply where local codes permit connecting the frame-ground conductor to the neutral (white) junction box wire.

A

 

B

 

C

G

 

H

D

 

E

 

F

I

 

A. Cable from power supply

F. 4-wire cable from range

B. Junction box

G. Black wires

C. Red wires

H. UL listed wire nuts

D. White wire (from power supply)

I. UL listed or CSA approved

E. White and green (or bare) grounding

conduit connector

wires (from range) - factory crimped

 

1.Disconnect power.

2.Remove junction box cover if present.

3.Connect the flexible armored cable from the range to the junction box using a UL listed or CSA approved conduit connector.

4.Tighten screws on conduit connector if present.

5.Connect the two black wires together using UL listed wire nuts.

6.Connect the two red wires together using UL listed wire nuts.

7.Connect the factory-crimped bare and white range cable wires to the white (neutral) wire in the junction box using UL listed wire nuts.

8.Install junction box cover.

9.Reconnect power.

Attach Backguard or Island Trim

WARNING

Excessive Weight Hazard

Use two or more people to move and install range. Failure to do so can result in back or other injury.

1.Using 2 or more people, move range close to cabinet opening.

2.Remove cardboard or hardboard from under range. Move range into final position.

3.Attach the backguard or island trim as required for your installation. See “Tools and Parts.” Attachment screws are included in the literature package.

Attaching the Backguard

36" model shown

A

A. 3 front screws (4 rear screws required but not shown)

Attaching the Island Trim

36" model shown

A

A. Center hole not used

4.Using 2 or more people, tip the range back so that the front feet lift off the ground. Slide range toward the wall until the rear brace is under the anti-tip bracket. Stand range up, making sure the anti-tip bracket catches the rear brace.

Make Gas Connection

1.Assemble flexible connector from gas supply pipe to pressure regulator located in the middle front of the range.

2.Apply pipe-joint compound made for use with LP gas to the smaller thread ends of the flexible connector adapters (see B and G in following illustration).

3.Attach one adapter to the gas pressure regulator and the other adapter to the gas shutoff valve. Tighten both adapters.

4.Use a ¹⁵⁄₁₆" combination wrench and channel lock pliers to attach the flexible connector to the adapters. Check that connector is not kinked.

A B C

D

E

 

H G

F

A. Gas pressure regulator

E. Manual gas shutoff valve

B. Use pipe-joint compound

F. ½" or ¾" gas pipe

 

C. Adapter (must have ½" male

G. Use pipe-joint compound

pipe thread)

H. Adapter

 

D. Flexible connector

 

 

11

Page 10 Page 12
Page 11
Image 11
KitchenAid Cooktop Attach Backguard or Island Trim, Make Gas Connection, Attaching the Backguard, Model shown
Page 10 Page 12

Cooktop specifications

The KitchenAid Cooktop stands as a paragon of innovative design and advanced culinary technology, designed to elevate your cooking experience. This premium kitchen appliance combines functionality, style, and performance, catering to both amateur home cooks and seasoned culinary professionals.

One of the main features of the KitchenAid Cooktop is its versatility. Available in both gas and electric options, the cooktop accommodates a diverse range of cooking methods. The gas models boast powerful burners that provide precise temperature control, while the electric induction options offer rapid heating and quick response times that allow for seamless transitions between simmering and boiling.

The cooktop's impressive design features a sleek, minimalist aesthetic that enhances any modern kitchen. With options for both stainless steel and black finishes, it integrates harmoniously with a variety of kitchen styles. The surface is crafted from durable materials, ensuring resistance to scratches and stains while making cleaning straightforward and hassle-free.

One of the standout technologies integrated into the KitchenAid Cooktop is its advanced induction cooking system. This system uses magnetic fields to heat cookware directly, ensuring efficient energy use and a cooler cooking surface. This not only reduces the risk of burns but also allows for easier cleanup, as spills and splatters are less likely to scorch on the cool surface.

Another critical feature is the even heat distribution technology found in certain models. This ensures that food is cooked uniformly, reducing the chances of hot or cold spots that can lead to uneven cooking. Additionally, the cooktop is equipped with intuitive touch controls for precise settings and timer functions, giving users ultimate command over their culinary creations.

Safety is paramount in the design of the KitchenAid Cooktop. Features such as automatic shut-off, hot surface indicators, and child lock safety functions are designed to protect users and provide peace of mind during operation.

In summary, the KitchenAid Cooktop epitomizes the perfect blend of aesthetics, technology, and safety. From its versatile cooking options to its advanced induction technology and user-friendly design, this cooktop is a testament to KitchenAid's commitment to quality and innovation in the culinary appliance market. Whether you're sautéing vegetables or simmering sauces, the KitchenAid Cooktop delivers a reliable and efficient cooking experience that enhances any kitchen.
Top Page Image Contents