B

A

D

E F

G

C

H

ElectricalRequirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

A. 12" (30.5 cm) minimum to sear

E. 7¹⁄₈" (18.1 cm)

burner or any accessory

F. Gas line location at rear of

B. 13¹⁄₂" (34.3 cm)

side burner

C. 22¹¹⁄₁₆" (57.6 cm)

G. 10⁵⁄₈" (27.0 cm)

D. 2¹⁄₄" (5.7 cm)

H. 35¹⁄₂" (90.2 cm)

Built-in Outdoor Sear Burner Enclosure Ventilation for LP Gas:

An enclosure for an LP gas fuel tank is to be ventilated by openings at both the top and lower levels of the enclosure.

If converting to LP gas these vents are to be in the enclosure:

An enclosure for use with an LP gas fuel tank for built-in installation is to have at least one ventilation opening on an exposed exterior side located within 5" (12.7 cm) of the top is to be a minimum of 20 in.2 (129.0 cm2). One ventilation opening within 1" (2.5 cm) of the bottom of the enclosure and the bottom opening is to be a minimum of 10 in.2 (64.5 cm2). All vent openings are to be unobstructed. Every opening is to be a minimum of ¹⁄₈" (0.32 cm) wide.

If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the ground path is adequate.

Check with a qualified electrician if you are not sure whether the infrared sear burner is properly grounded.

A120-volt, 60-Hz, AC-only, 15-amp, fused electrical supply is required.

It is recommended that a separate circuit serving only this sear burner be provided.

The model/serial number rating plate is located on the right-hand side panel. See the following illustration.

A

A. Model/serial number plate

20 in.2 (129.0 cm2) min. ventilation both sides

1" (2.5 cm) max.

10 in.2 (64.5 cm2) min. ventilation both sides

5" (12.7 cm) max.

5" (12.7 cm) max.

Recommended Ground Method

The outdoor infrared sear burner, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, with the National Electrical Code ANSI/ NFPA 70, or Canadian Electrical Code, CSA C22.1.

Copies of the standards listed above may be obtained from: CSA International

8501 East Pleasant Valley Rd.

Cleveland, Ohio 44131-5575

National Fire Protection Association

One Batterymarch Park

Quincy, Massachusetts 02269

B

A

C

A. 3 prong ground plug

B. Grounded 3 prong outlet

C. Ground prong

6

Page 6
Image 6
KitchenAid KBEU121T installation instructions ElectricalRequirements, Recommended Ground Method

KBEU121T specifications

The KitchenAid KBEU121T is a high-performance kitchen appliance designed for the modern home chef. Combining cutting-edge technologies with a sleek design, this blender is perfect for blending, pureeing, and making a variety of recipes, from smoothies to soups. One of the standout features of the KBEU121T is its powerful motor, which delivers exceptional blending performance, tackling even the toughest ingredients with ease.

The blender boasts a 1200-watt motor that can reach high speeds, enabling users to achieve smooth and consistent results in a matter of seconds. The variable speed control allows users to adjust the blending speed according to the recipe, ensuring optimal texture and consistency. A pulse function is also included, providing an extra burst of power when needed, making it ideal for chunky salsas and finely chopping ingredients.

Equipped with a unique asymmetric blade design, the KBEU121T ensures that all ingredients are evenly blended, preventing unwanted chunks in your mixture. The stainless steel blades are durable and efficient, designed to withstand daily use and maintain their sharpness over time. The large, 1.5-liter blending jar is made from BPA-free materials and features a pour spout for effortless serving.

The KBEU121T also emphasizes ease of use with its intuitive interface and one-touch controls. The ergonomic design of the blender makes it comfortable to handle, while the non-slip base provides stability during operation. Cleaning is a breeze, as the blending jar and blades are dishwasher safe, allowing for quick and easy maintenance.

Another impressive feature of the KitchenAid KBEU121T is its built-in technology. The blender includes intelligent programs that automatically adjust blending times and speeds based on the load in the jar, ensuring perfect results every time.

For those who value aesthetics in their kitchen appliances, the KBEU121T is available in an array of stylish colors to suit any kitchen decor. The high-quality finish and modern design not only deliver exceptional performance but also enhance the kitchen’s visual appeal.

In summary, the KitchenAid KBEU121T is an all-around powerful and user-friendly blender that simplifies food preparation while enhancing the cooking experience. With its robust features, modern technology, and elegant design, it is an essential addition to any culinary enthusiast's kitchen.