5.Use adjustable wrench to remove LP hose regulator from brass elbow. Use adjustable wrench to remove brass elbow.

A

B

C

11.Remove stem from cap, turn it over and snap stem back into the cap so the letters “LP” are at the end of the stem farthest away from the brass cap.

LP

12. Use adjustable wrench to reinstall cap onto regulator.

D

A.Manifold

B.Brass elbow

C.Rear of Power™ burner

D.Gas pressure regulator/hose assembly

6.Apply pipe sealant to the threads of the brass connector. Use pipe thread sealant that is certified for use with LP gas.

7.Use adjustable wrench to install brass connector (supplied) to manifold fitting.

NOTE: The arrow on the regulator must be pointing toward the brass connector.

8.Use pipe wrench to install the convertible regulator. Brass cap will be facing up when tight.

AB

A. Brass connector

B. Convertible regulator

9.To set the appliance regulator for LP gas, use adjustable wrench to remove the brass cap on the convertible regulator.

10.Examine the stem on the brass cap. The letters “NAT” should be showing on the end of the plastic stem farthest away from the brass cap.

Make Power™ Burner Connections

Connect Local LP Gas Supply

1.Use pipe wrench to connect certified ½" (1.3 cm) gas supply pipe to inlet side of regulator from Fixed LP gas supply according to local codes requirements. Use pipe thread sealant that is certified for use with LP gas at connections where required. There must be a certified manual shutoff valve in the gas supply line near the Power™ burner for easy access.

2.Turn on the gas supply to the Power™ burner.

3.Test all connections by brushing on an approved noncorrosive leak-detection solution. Bubbles will show a leak. Correct any leaks found.

Record Conversion

In the last page of the Use and Care Guide, write “Converted to Local LP Gas Supply.” Also record the conversion date and the technician/company that performed the conversion.

Conversion from LP Gas to Natural Gas

Installation of the regulator

1.Turn off the main gas supply valve.

2.Unplug Power™ burner or disconnect power.

3.Disconnect 20 lb LP gas fuel tank (if present).

4.Turn off all burner control valves.

5.Use adjustable wrench to remove LP hose regulator from brass elbow. Use adjustable wrench to remove brass elbow.

A

B

C

D

A.Manifold

B.Brass elbow

C.Rear of Power™ burner

D.Gas pressure regulator/hose assembly

16

Page 16
Image 16
KitchenAid KBPU182VSS Conversion from LP Gas to Natural Gas, Make Power Burner Connections Connect Local LP Gas Supply

KBPU182VSS specifications

The KitchenAid KBPU182VSS is a standout appliance that perfectly combines style and functionality for modern kitchens. This built-in refrigerator is designed to enhance the food storage experience, offering a range of features that cater to performance and aesthetics alike.

One of the most notable features of the KBPU182VSS is its spacious interior, with a capacity of 18 cubic feet, which allows ample room for groceries, leftovers, and culinary ingredients. The stainless steel finish adds a sleek and contemporary look, making it a perfect fit for various kitchen designs. This model seamlessly integrates into cabinetry, ensuring a polished and cohesive kitchen appearance.

The refrigerator is equipped with the advanced FreshSeal technology that helps to keep food fresher for longer. This is achieved through enhanced cooling capabilities that maintain consistent temperatures. The cooling system utilizes a dual evaporator, which is essential for optimal humidity control. This feature prevents odor mixing between the fridge and freezer, ensuring that everything—from meats to fruits—remains flavorful and fresh.

Organization is another key aspect of the KBPU182VSS. It features adjustable shelves that allow users to customize the interior layout according to their storage needs. The produce drawers are specifically designed to maintain ideal humidity levels for fruits and vegetables, prolonging their freshness. Additionally, the model comes with specialized storage for beverages, dairy, and other commonly used items, promoting convenience in access.

One innovative feature is the vibrant LED lighting that illuminates the interior, making it easy to find items quickly, even in low-light conditions. The door bins are designed for easy access and can accommodate larger bottles and containers, proving to be a practical solution for busy households.

The KitchenAid KBPU182VSS also boasts energy-efficient technology, reducing its environmental impact while keeping energy bills low. This is in line with KitchenAid's commitment to sustainability, giving customers peace of mind regarding their energy consumption.

In summary, the KitchenAid KBPU182VSS perfectly melds style, functionality, and technology, making it an excellent choice for anyone looking to upgrade their kitchen. Its thoughtful design features, advanced cooling technologies, and organization options set it apart in the competitive market of built-in refrigerators, satisfying both aesthetic and practical needs.