OPERATING THE COFFEE BREWER
3 | After pressing SET to choose AM or PM |
for your Delay start brew time, 2 beeps | |
| will sound and you will be returned to |
| the programming menu. The Delay start |
| program is ready to use. |
English
You can use the same Delay start brew time again by pressing the menu button twice, then pressing SET three times before brewing. To cancel the Delay start feature at any time, press the BREW button two times.
NOTE: You must complete step 4 each time you wish to enable the Delay start feature.
Filling the water tank
The water tank holds between 2 and 8 cups of water (5 oz. each) for brewing. Since you are able to select the number of cups you’d like to brew each time, you do not have to fill the water tank with the exact amount of water you need. The Coffee Maker will use the correct amount of water for the number of cups you select.
1 | Slide the water tank lid back, and fill |
the water tank with fresh, filtered water |
to the desired cup level as indicated on the water tank view. Because of the design of this Coffee Brewer, it may take a moment for the water to enter the place in the tank where you can view the water level. Close the water tank lid.
NOTE: If the water in the tank has been sitting for awhile and you wish to start fresh, select 8 cups and press the BREW button (without coffee in the brew basket). This will cycle through any stale water in the tank.
HELPFUL TIP: For best taste and brewing results, make sure you have enough water in the tank for the number of cups you want to brew.
11
