6
Automatic cooking functions
All elements feature automatic cooking levels (Simmer and Melt)
that will set the cooktop to precisely the right level for special
tasks. These settings can be used on more than one element at
the same time.
To Us e:
1. Touch the display area of the cooking element you want to
use.
2. Touch the setting you wish to use (Simmer or Melt). An “A”
will appear in the display, and the indicator light next to the
correct function will light.
Hot Surface Indicator Light
An “H” will appear in the surface cooking area display as long as
any surface cooking area is too hot to touch, even after the
surface cooking area(s) is turned off.
Component Temperature Management
The cooktop regulates the temperature of the internal
components during use. The cooktop may automatically reduce
the power of all the elements in use to keep the internal
components from overheating. To resume optimal cooking
performance, allow the cooktop to cool down for 30 minutes.
Keep WarmThe Keep Warm surface cooking area can be used to keep
cooked foods warm. One hour is the recommended maximum
time to maintain food quality.
It is not recommended for heating cold foods. When the Keep
Warm function is in use, it will not glow red like the cooking
zones, but the indicator light will glow on the control panel.
Use only cookware and dishes recommended for oven and
cooktop use, and those that have flat bottoms to make direct
contact with the cooktop surface. Use pot holders or oven mitts
to remove cookware.
Cover all foods with a lid or aluminum foil. Do not use plastic
wrap to cover food, as it may melt onto the cooktop surface.
When warming baked goods, allow a small opening in the cover
for moisture to escape.
To U se :
1. Touch the display area of the cooking element you want to
use. Keep Warm can be used on more than one element at
the same time.
2. Touch the Keep Warm setting. An “A” will appear in the
display, and the indicator light next to the correct function will
light.
SimmerThe Simmer function can be used on all surface cooking areas.
Simmer can be used on more than 1 surface cooking area at a
time.
To U se
To Turn On:
1. Check that a surface cooking area has been selected.
2. Touch SIMMER. “A” will appear in the display, and the
indicator light next to Simmer will light.
To Turn Off:
Simmer can be turned off in 3 different ways:
1. Use the power slider to set to a heat level.
OR
2. Touch the surface cooking area OFF keypad.
OR
3. Select a different cooking function.
MeltThe Melt function can be used on all surface cooking areas. Melt
+ Hold can be used on more than 1 surface cooking area at a
time.
To U se
To Turn On:
1. Check that a surface cooking area has been selected.
2. Touch MELT. “A” will appear in the display, and the indicator
light next to Melt will light.
To Turn Off:
Melt can be turned off in 3 different ways:
1. Use the power slider to set to a heat level.
OR
2. Touch the surface cooking area OFF keypad.
OR
3. Select a different cooking function.
WARNING