Start
The START pad begins any oven function except the Timer, Control Lock and Sabbath Mode. If not pressed within 5 seconds after pressing a pad, “START?” will appear on the oven display as a reminder. If not pressed within 5 minutes after pressing a pad, the oven display will return to inactive mode (blank) and the programmed function will be canceled.
ControlLock
The Control Lock shuts down the control panel pads to prevent unintended use of the oven. The Control Lock is preset unlocked, but can be locked.
When the control is locked, only the TIMER SET/START and TIMER OFF pads will function.
To Lock/Unlock Control: Before locking, make sure the oven, the Timer and Timed Cooking are off. Press and hold the START pad for 5 seconds until “CONTROL LOCK” appears on the display. Repeat to unlock and remove “CONTROL LOCK” from the display.
Off
The OFF pad stops any oven function except for the Warming Drawer, Clock, Timer and Control Lock.
Clock/TimerDisplay
This is a
1.Press CLOCK SET/START.
2.Press number pads to set time of day.
3.Press CLOCK SET/START
OPTIONS
OptionsSelection Pad
The OPTIONS selection pad allows you to access 10 hidden functions within the Electronic Oven Control. These hidden functions allow you to change the oven temperature between Fahrenheit and Celsius, turn the audible signals and prompts on and off and adjust the oven calibration. The Sabbath Mode is also set using the OPTIONS selection pad.
To Use: Press OPTIONS. The oven display will scroll through the various options, starting at 1 and ending in 0. You can also press the OPTIONS selection pad and number pad to quickly access the desired hidden function.
OPTIONS | HIDDEN FUNCTION |
|
|
1 | Fahrenheit and Celsius conversion |
2 | Sound On/Off |
3 | Sound High/Low |
4 | End Beep On/Off |
6 | Oven temperature calibration |
7 | Sabbath Mode |
Fahrenheit and Celsius
Press options, then 1 on the keypad for Celsius. Repeat to convert back to Fahrenheit.
Tones
Tones are audible signals, indicating the following:
One beep
■Function has been entered
Three beeps
■Invalid pad press
Timer Completion Tones
Three chimes occur when the timer reaches zero. This can be when using the timer for functions other than cooking.
Cooking Time Completion Tones
Three beeps indicate the end of a cooking cycle. Press OPTIONS, and then 4 to turn ON. Press OPTIONS, and then 4 to turn OFF.
Preheat Completion Tone
One chime indicates a preheat cycle has been completed.
All Tones
All tones are preset ON, but can be turned OFF. To turn tones ON, press the options key, then press keypad 2. To turn tones OFF, press the options key again, and then press keypad 2.
Tone Volume
The volume is preset at high, but can be changed to low.
To Change: Press OPTIONS, and then 3 to lower the volume. Press options 3 to raise the volume of the tones.
Oven Temperature Control
IMPORTANT: Do not use a thermometer to measure oven temperature because opening the oven door during cycling may give incorrect readings.
The oven provides accurate temperatures; however, it may cook faster or slower than your previous oven, so the temperature calibration can be adjusted. It can be changed in Fahrenheit or Celsius.
A minus sign means the oven will be cooler by the displayed amount. The absence of a sign means the oven will be warmer by the displayed amount. Use the following chart as a guide.
ADJUSTMENT °F (AUTOMATIC | COOKS FOOD |
°C CHANGE) |
|
|
|
10°F (5°C) | ...a little more |
|
|
20°F (10°C) | ...moderately more |
|
|
35°F (15°C) | ...much more |
|
|
...a little less | |
|
|
...moderately less | |
|
|
...much less | |
|
|
To Adjust Oven Temperature Calibration:
1.Press OPTIONS, and then 6 to set the calibration.
2.Press 3 to increase the temperature, or press 6 to decrease the temperature.
3.Press START to end calibration.
16
