Built-In Outdoor Grills
Natural Gas:
INSTALLATION INSTRUCTIONS
Portable Outdoor Grill Installation
Assemble Cooking Area
Portable ArchitectTM Series Outdoor Grill
WARNING
rear of grill
flexible gas connector
1/2” grill |
gas pipe |
Excessive Weight Hazard
Use two or more people to move and install grill. Failure to do so can result in back or other injury.
1. Move grill into desired outdoor location.
2.Open the hood.
For models with side burners:
1. Remove side burner cover from the top of the carton that is |
located on the grill grate. Remove bubble wrap from side burner |
cover and set aside. |
The supply line shall be equipped with an approved shutoff valve. This valve should be located in the same area as the grill and should be in a location that allows ease of opening and closing. Do not block access to the shutoff valve. The valve is for turning on or shutting off gas to the appliance.
Shutoff valve “open” position
gas supply line | To grill |
L.P. gas conversion from a local L.P. gas supply:
Conversion must be made by a qualified person. A qualified natural gas technician shall provide the L.P. gas supply to the selected grill location in accordance with the National Fuel Gas Code ANSI Z223.1/NFPA 54
To convert to L.P. gas, the L.P. Gas Conversion Kit No. 4396311 must be used. Follow Instructions included with kit.
L.P. gas conversion using an L.P. fuel tank:
To convert to L.P. gas, the L.P. Gas Conversion Kit No. 4396311 must be used. Follow Instructions included with kit.
An L.P. gas cylinder, not larger than 20 pounds, must be purchased separately.
2. | Open carton located on the grill grate. Remove side burner |
| grate, unwrap and set aside. |
3. | Remove burners and burner caps from carton and unwrap. |
4. | Install each set of burners and caps inside the side burner |
cavity as shown.
notch
burner
cap
burner | alignment |
| |
| tab |
5.Install side burner grate and cover (with extension toward grill) as shown.
cover
extension
burner grate
6.Dispose of/recycle all packaging material.
8
